pro princeton_header__define ; NOTE: the following values should not change, otherwise the header will ; be bleeped up. HDRNAMEMAX = 120 ; max char str length for file name USERINFOMAX = 1000 ; user information space. COMMENTMAX = 80 ; User comment string max length (5 comments) LABELMAX = 16 ; Label string max length. FILEVERMAX = 16 ; File version string max length. DATEMAX = 10 ; string length of file creation date string as ddmmmyyyy\0 ROIMAX = 10 ; Max size of roi array of structures. TIMEMAX = 7 ; Max time store as hhmmss\0 HEADER_VERSION = 2.0 C_UNKNOWN = -1 C_ST1000 = 0 C_ST120NEW = 1 C_ST120OLD = 2 C_ST130 = 3 C_ST121 = 4 C_ST138 = 5 C_DC131 = 6 C_ST133 = 7 C_ST135 = 8 C_VICCD = 9 C_ST116 = 10 C_OMA3 = 11 C_OMA4 = 12 C_ST143 = 13 C_VICCDBOX = 14 C_MICROMAX = 15 C_SPECTROMAX = 16 C_MICROVIEW = 17 C_LOW_COST_SPEC = 18 C_ST133_5MHZ = 19 C_EMPTY_5MHZ = 20 C_EPIX_CONTROLLER = 21 C_PVCAM = 22 C_GENERIC = 23 ROIinfo = {princeton_ROIinfo, $ ; ROI information startx: 0, $ ; left x start value. endx: 0, $ ; right x value. groupx: 0, $ ; amount x is binned/grouped in hw. starty: 0, $ ; top y start value. endy: 0, $ ; bottom y value. groupy: 0 $ ; amount y is binned/grouped in hw. } ; 12 Bytes Each princeton_calibration = {princeton_calibration, $ offset: 0.d, $ ; 3000 3489 offset for absolut data scaling factor: 0.d, $ ; 3008 3497 factor for absolut data scaling current_unit: 0B, $; ; 3016 3505 selected scaling unit CalibReserved1: 0B, $ ; 3017 3506 reserved display_string: bytarr(40), $ ; 3018 3507 string used for drawing axes... CalibReserved2: bytarr(40), $ ; 3058 3547 reserved calib_valid: 0B, $ ; 3098 3587 flag if calibration is valid input_unit: 0B, $ ; 3099 3588 current input units for "calib_value" polynounit: 0B, $ ; 3100 3589 linear UNIT and used in the "polynocoeff" polynoorder: 0B, $ ; 3101 3590 ORDER of calibration POLYNOM calib_count: 0B, $ ; 3102 3591 valid calibration data pairs pixel_position: dblarr(10), $ ; 3103 3592 pixel pos. of calibration data calib_value: dblarr(10), $ ; 3183 3672 calibration VALUE at above pos polynocoeff: dblarr(6), $ ; 3263 3752 polynom COEFFICIENTS laser_position: 0.d, $ ; 3311 3800 laser wavenumber for relativ WN CalibReserved3: 0B, $ ; 3319 3808 reserved leftover_flag: 0B, $ ; 3320 3809 not used. user_label: bytarr(40), $ ; 3321 3810 Calibration label expansion: bytarr(128) $ ; 3361 3850 Expansion area } princeton_header = {princeton_header, $ ControllerVersion: 0, $ ; 0 Hardware Version LogicOutput: 0, $ ; 2 Definition of Output BNC AmpHiCapLowNoise: 0, $ ; 4 Amp Switching Mode xDimDet: 0, $ ; 6 Detector x dimension of chip. mode: 0, $ ; 8 timing mode exp_sec: 0., $ ; 10 alternitive exposure, in sec. VChipXdim: 0, $ ; 14 Virtual Chip X dim VChipYdim: 0, $; ; 16 Virtual Chip Y dim yDimDet: 0, $ ; 18 y dimension of CCD or detector. date: "", $ ; 20 date VirtualChipFlag: 0, $ ; 30 On/Off Spare_1: bytarr(2), $ ; 32 noscan: 0, $ ; 34 Old number of scans - should always be -1 DetTemperature: 0., $ ; 36 Detector Temperature Set DetType: 0, $ ; 40 CCD/DiodeArray type xdim: 0, $ ; 42 actual # of pixels on x axis stdiode: 0, $ ; 44 trigger diode DelayTime: 0., $ ; 46 Used with Async Mode ShutterControl: 0, $ ; 50 Normal, Disabled Open, Disabled Closed AbsorbLive: 0, $ ; 52 On/Off AbsorbMode: 0, $ ; 54 Reference Strip or File CanDoVirtualChipFlag: 0, $ ; 56 T/F Cont/Chip able to do Virtual Chip ThresholdMinLive: 0, $ ; 58 On/Off ThresholdMinVal: 0., $ ; 60 Threshold Minimum Value ThresholdMaxLive: 0, $ ; 64 On/Off ThresholdMaxVal: 0., $ ; 66 Threshold Maximum Value SpecAutoSpectroMode: 0, $ ; 70 T/F Spectrograph Used SpecCenterWlNm: 0., $ ; 72 Center Wavelength in Nm SpecGlueFlag: 0, $ ; 76 T/F File is Glued SpecGlueStartWlNm: 0., $ ; 78 Starting Wavelength in Nm SpecGlueEndWlNm: 0., $ ; 82 Starting Wavelength in Nm SpecGlueMinOvrlpNm: 0., $ ; 86 Minimum Overlap in Nm SpecGlueFinalResNm: 0., $ ; 90 Final Resolution in Nm PulserType: 0, $ ; 94 0=None, PG200=1, PTG=2, DG535=3 CustomChipFlag: 0, $ ; 96 T/F Custom Chip Used XPrePixels: 0, $ ; 98 Pre Pixels in X direction XPostPixels: 0, $ ; 100 Post Pixels in X direction YPrePixels: 0, $ ; 102 Pre Pixels in Y direction YPostPixels: 0, $ ; 104 Post Pixels in Y direction asynen: 0, $ ; 106 asynchron enable flag 0 = off datatype: 0, $ ; 108 experiment datatype ; 0 = FLOATING POINT ; 1 = LONG INTEGER ; 2 = INTEGER ; 3 = UNSIGNED INTEGER PulserMode: 0, $ ; 110 Repetitive/Sequential PulserOnChipAccums: 0, $ ; 112 Num PTG On-Chip Accums PulserRepeatExp: 0L, $ ; 114 Num Exp Repeats (Pulser SW Accum) PulseRepWidth: 0., $ ; 118 Width Value for Repetitive pulse (usec) PulseRepDelay: 0., $ ; 122 Width Value for Repetitive pulse (usec) PulseSeqStartWidth: 0., $ ; 126 Start Width for Sequential pulse (usec) PulseSeqEndWidth: 0., $ ; 130 End Width for Sequential pulse (usec) PulseSeqStartDelay: 0., $ ; 134 Start Delay for Sequential pulse (usec) PulseSeqEndDelay: 0., $ ; 138 End Delay for Sequential pulse (usec) PulseSeqIncMode: 0, $ ; 142 Increments: 1=Fixed, 2=Exponential PImaxUsed: 0, $ ; 144 PI-Max type controller flag PImaxMode: 0, $ ; 146 PI-Max mode PImaxGain: 0, $ ; 148 PI-Max Gain BackGrndApplied: 0, $ ; 150 1 if background subtraction done PImax2nsBrdUsed: 0, $ ; 152 T/F PI-Max 2ns Board Used minblk: 0, $ ; 154 min. # of strips per skips numminblk: 0, $ ; 156 # of min-blocks before geo skps SpecMirrorLocation: intarr(2), $ ; 158 Spectro Mirror Location, 0=Not Present SpecSlitLocation: intarr(4), $ ; 162 Spectro Slit Location, 0=Not Present CustomTimingFlag: 0, $ ; 170 T/F Custom Timing Used ExperimentTimeLocal: "", $ ; 172 Experiment Local Time as hhmmss\0 ExperimentTimeUTC: "", $ ; 179 Experiment UTC Time as hhmmss\0 ExposUnits: 0, $ ; 186 User Units for Exposure ADCoffset: 0, $ ; 188 ADC offset ADCrate: 0, $ ; 190 ADC rate ADCtype: 0, $ ; 192 ADC type ADCresolution: 0, $ ; 194 ADC resolution ADCbitAdjust: 0, $ ; 196 ADC bit adjust gain: 0, $ ; 198 gain Comments: strarr(5), $ ; 200 File Comments geometric: 0, $ ; 600 geometric ops: rotate 0x01, ; reverse 0x02, flip 0x04 xlabel: "", $ ; 602 intensity display string cleans: 0, $ ; 618 cleans NumSkpPerCln: 0, $ ; 620 number of skips per clean. SpecMirrorPos: intarr(2), $ ; 622 Spectrograph Mirror Positions SpecSlitPos: fltarr(4), $ ; 626 Spectrograph Slit Positions AutoCleansActive: 0, $ ; 642 T/F UseContCleansInst: 0, $ ; 644 T/F AbsorbStripNum: 0, $ ; 646 Absorbance Strip Number SpecSlitPosUnits: 0, $ ; 648 Spectrograph Slit Position Units SpecGrooves: 0., $ ; 650 Spectrograph Grating Grooves srccmp: 0, $ ; 654 number of source comp. diodes ydim: 0, $ ; 656 y dimension of raw data. scramble: 0, $ ; 658 0=scrambled,1=unscrambled ContinuousCleansFlag: 0, $ ; 660 T/F Continuous Cleans Timing Option ExternalTriggerFlag: 0, $ ; 662 T/F External Trigger Timing Option lnoscan: 0L, $ ; 664 Number of scans (Early WinX) lavgexp: 0L, $ ; 668 Number of Accumulations ReadoutTime: 0., $ ; 672 Experiment readout time TriggeredModeFlag: 0, $ ; 676 T/F Triggered Timing Option Spare_2: bytarr(10), $ ; 678 sw_version: "", $ ; 688 Version of SW creating this file type: 0, $ ; 704 0=1000,1=new120,2=old120,3=130, ; st121=4,st138=5,dc131(PentaMax)=6, ; st133(MicroMax)=7,st135(GPIB)=8, ; VICCD=9, ST116(GPIB)=10, ; OMA3(GPIB)=11,OMA4=12 flatFieldApplied: 0, $ ; 706 1 if flat field was applied. Spare_3: bytarr(16), $ ; 708 kin_trig_mode: 0, $ ; 724 Kinetics Trigger Mode dlabel: "", $ ; 726 Data label. Spare_4: bytarr(436), $ ; 742 PulseFileName: "", $ ; 1178 Name of Pulser File with ; Pulse Widths/Delays (for Z-Slice) AbsorbFileName: "", $ ; 1298 Name of Absorbance File (if File Mode) NumExpRepeats: 0L, $ ; 1418 Number of Times experiment repeated NumExpAccums: 0L, $ ; 1422 Number of Time experiment accumulated YT_Flag: 0, $ ; 1426 Set to 1 if this file contains YT data clkspd_us: 0., $ ; 1428 Vert Clock Speed in micro-sec HWaccumFlag: 0, $ ; 1432 set to 1 if accum done by Hardware. StoreSync: 0, $ ; 1434 set to 1 if store sync used. BlemishApplied: 0, $ ; 1436 set to 1 if blemish removal applied. CosmicApplied: 0, $ ; 1438 set to 1 if cosmic ray removal applied CosmicType: 0, $ ; 1440 if cosmic ray applied, this is type. CosmicThreshold: 0., $ ; 1442 Threshold of cosmic ray removal. NumFrames: 0L, $ ; 1446 number of frames in file. MaxIntensity: 0., $ ; 1450 max intensity of data (future) MinIntensity: 0., $ ; 1454 min intensity of data (future) ylabel: "", $ ; 1458 y axis label. ShutterType: 0, $ ; 1474 shutter type. shutterComp: 0., $ ; 1476 shutter compensation time. readoutMode: 0, $ ; 1480 readout mode, full,kinetics, etc WindowSize: 0, $ ; 1482 window size for kinetics only. clkspd: 0, $ ; 1484 clock speed for kinetics & frame transfer. interface_type: 0, $ ; 1486 computer interface ; (isa-taxi, pci, eisa, etc.) NumROIsInExperiment: 0, $ ; 1488 May be more than the 10 allowed in ; this header (if 0, assume 1) Spare_5: bytarr(16), $ ; 1490 controllerNum: 0, $ ; 1506 if multiple controller system will ; have controller number data came from. ; this is a future item. SWmade: 0, $ ; 1508 Which software package created this file NumROI: 0, $ ; 1510 number of ROIs used. if 0 assume 1. ROIinfoblk: replicate(ROIinfo, ROIMAX), $ ; 1512 ROI information FlatField: "", $ ; 1632 Flat field file name. background: "", $ ; 1752 background sub. file name. blemish: "", $ ; 1872 blemish file name. file_header_ver: 0., $ ; 1992 version of this file header YT_Info: bytarr(1000), $ ; 1996-2996 Reserved for YT information WinView_id: 0L, $ ; 2996 == 0x01234567L if in use by WinView xcalibration: {princeton_calibration}, $ ; 3000 -> 3488 X axis calibration ycalibration: {princeton_calibration}, $ ; 3489 -> 3977 Y axis calibration Istring: "", $ ; 3978 special intensity scaling string Spare_6: bytarr(80), $ ; 4018 lastvalue: 0 $ ; 4098 Always the LAST value in the header } ; 4100 Bytes Total Header Size end